No.2 AISI1095 SCREW EXTRACTOR

Used expressly for removing broken or seized screws. They are left-handed, for use on right-handed threads. The screw is first drilled out to the proper diameter for that extractor. The extractor is then inserted into this hole and turned counter-clockwise using a tap wrench. As the extractor is turned the flutes on the tool dig into the screw, causing it to lock tightly and apply sufficient torque to remove the screw.

Nominal DiameterNo2
Flute Length18mm
Overall Length59mm
FinishGrey Finish

There are no downloads for this product.